GPM AVENGER GEN2  9MM DEDICATED COLT MAG  LIGHTWEIGHT BILLET LOWER RECEIVER IS BACK IN STOCK
Comments

GPM AVENGER GEN2 9MM DEDICATED COLT MAG LIGHTWEIGHT BILLET LOWER RECEIVER IS BACK IN STOCK

(5 reviews) Write a Review
$249.99
SKU:
Lower-250000000010-Black
UPC:
250000000010
Shipping:
$16.99 (Fixed Shipping Cost)
Size Chart

Nedd Some Advice? Speak to one of our gearheads

                               

                                                             !! BACK IN STOCK !! 

                          Gun Point M9 9mm AR15 Lower Receiver  Colt Pattern Magazine

The Gun Point Custom GEN2  Colt M9 9mm Billet lower receiver is a unique design, sleek and strong built unit that comes with all the features in the top of the line models without the high cost. We have designed this lower with with all the key features of our famous GMP-15 design in a NEW lightweight enhanced version. This version has cleaner, sleeker lines and 45/90 degree compatible selector pictogram markings.

AS ALWAYS, NO ROLL PINS!! The roll pin has been replaced with a set screw to eliminate the need of beating on the lower receiver. The rear take down pin detent spring is also held in with a set screw making it easier for you to change buffer tubes. Our receiver tension set screw effectively eliminates any unwanted "slop" between upper and lower receivers for superior accuracy. The oversize trigger guard gives you ample clearance when using gloves and the Finger Rest naturally guides the tip of your finger to the same resting place each time. !!! LRBHO !!! Last round bolt hold open on an empty magazine without the need of any special 9mm bolt catch. Compatible with any Mil-Spec upper receiver. 

 This dedicated 9mm lower receiver is designed for the Colt style magazine.

  • 7075 Billet Aluminum
  • Mil-Spec component compatible
  • Upper tensioning set screw 1/4 - 28x .375
  • Bolt Catch screw in pins in place of roll pins
  • Bolt Catch 6-32 pivot screw included
  • Threaded saftey detent hole for 6-32 set screw
  • 6-32 x .125 Saftey Detent set screw included
  • Integrated Oversize Trigger Guard
  • Finger Location Identifier / Finger Rest
  • Bullet pictogram selector markings 45 - 90 degree compatable
  • Last round bolt hold open on an empty magazine
  • Type III Class 2 Hardcoat Anodized Finish (Standard)
  • Optional Cerakote colors available - Add $50

 Please Note: Federal regulation requires that all firearms must be shipped to a licensed firearms dealer. 

Please follow these simple instructions on how to have us send your firearm:

How to Complete your Firearm order
If you have any questions about purchasing this firearm please call us at 941-219-4236.

NOTE !! SUPPLY IS LIMITED TO 20 UNITS !! LIMETED RUN OF LOGO ENGRAVED LOWERS !!

 

 

Write a Review

5 Customer Reviews Hide Reviews Show Reviews

  • Great dedicated 9mm lower
    5

    Posted by Colin on 31st Aug 2016

    Got this lower instead of a mag block that would have cost more. Very satisfied with fit and finish. Running a Rainer arms 9mm upper and 8" barrel, works great with metal form or RRA mags. With perfect mag retention and drops free without issue. Running RRA heavy buffer and spacer. Would recommend this for anyone doing a dedicated colt style ar 9mm build.

  • Awesome 9mm Lower
    5

    Posted by Chrispy on 9th Aug 2016

    Just got back from the range, BHO worked flawlessly. Ran about 200 rounds no issues with the JP innards. Very impressed AVGuns. The style and finish were awesome to begin with, but perfect function. I wish I had built a 9mm sooner. Great job, keep up the good work.

  • GUN POINT 9MM BILLET LOWER RECEIVER
    5

    Posted by Brent on 31st Mar 2016

    The GUN POINT 9MM Billet Lower Receiver is top quality. From the set screws to the oversize trigger guard to the engraving on both side of the receiver...couldn't ask for a nicer dedicated 9mm receiver!

  • Gunpoint 9mm M9 lower NICE!
    5

    Posted by Mike from VA on 31st Mar 2016

    This is a very nice lower. Super nice detail and finish. The set screw for the bolt catch is great. Nice tight fit to upper. Bolt hold open works great. It rides at the same height above the lower as a standard AR lower. Running 5.4oz 9mm buffer and XP spring and spacer. No problems with bolt catch breakage. I have both this and a QC10 lower and would choose this lower hands down over the QC10 and it cost less. I was on the fence with the look of the over-sized trigger guard but It looks great on my AR 9mm pistol. 100% satisfied with this Lower and AVGUNS service. If I had to pick a lower for another 9mm build it would be this one.

  • The lower is excellent quality and has a great finish.
    5

    Posted by Jerred on 7th Jan 2016

    One of the biggest worries I had for this build was the bolt stop, but the receiver has a built in piece so you can use a regular bolt catch. I also noticed that the receiver is a lower shelf, so if you had or wanted to buy a RDIAS then you are in business. Over all they shipped the product fast and everything went really smooth, and they e-mailed me threw out the process.

Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Related Products

Top